Rotorfan 8 65×92/80×80
ROTARY CONVECTION OVEN
- sized for 18 trays 65×92 or 80×80
- ELECTRICALLY powered and COMBUSTION (gas/diesel) powered.
- EXTRACTABLE cooking rack (not included)
OVEN COMPLETE WITH:
- Motorized extractor hood
- 30/10 stainless steel base
- Double-glazed door
- Cooking chamber, façade and door made of stainless steel
- High-performance armored heating elements
- New humidifier; enhanced, easy to access and totally removable
- Manual valve for the discharge of excess steam
Rotorfan 8 65×92/80×80
| Rotorfan 8 65×92 G | Rotorfan 8 65×92 E | |
|---|---|---|
| electric power (kw) | 2 | 47 |
| thermal power (Kcal) | 60,000 | / |
| baking surface (m²) | 11.5 | 11.5 |
| width (cm) | 147 | 147 |
| depth (cm) | 218 | 218 |
| height (H) | 233 | 233 |
| weight (kg) | 1150 | 1150 |
| number of trays | 18 | 18 |
| room minimum height (cm) | 290 | 300 |
Accessories
Single-stage blown-air burner
Aluminum frame.
Digital control equipment
Specifically made for bakery and pastry ovens
Proofer
- sized for 65×92 TROLLEYS
- ELECTRIC POWER SUPPLY
- available in 1- or 2-door versions
- available in 2- or 4-trolley versions
The proofer comes complete with :
- stainless steel facade and door
- Ventilation unit for the flow of warm and moist air inside the proofer
- Automatic heating and humidification systems
- 20/10 stainless steel base
- External paneling of self-extinguishing expanded polystyrene covered with two sheets of prepainted sheet metal
Since they use the same trolleys, the proofer can be combined with the following ovens :
- Top-rotor 65×92
- Rotorfan 8 65×92
Trolley
- rack trolley, removable, for rotary oven
- For 18 trays 65×92/80×80 (not included)
The trolley is made with the following features:
- 25mm square tubular stainless steel structure
- heat-resistant swivel wheels Ø100 mm
- totally dismountable structure
This cart can be used on the following ovens:
- Top-rotor 65×92
- Rotorfan 8 65×92
Optionals
LCD Control Panel
The electronic “LCD” panel allows management of various functions such as: delayed ignition, program storage, and programming of a multi-temperature firing cycle. It also has a manual operation section in case of emergency. In addition, this option includes the installation of an automatic valve to exhaust the vapors produced during cooking.
TOUCH Screen Control Panel
The electronic “TFT” panel with TOUCH SCREEN allows management of various functions such as, delayed ignition, program storage and programming of a multi-temperature firing cycle. By connecting it to the Internet via a LAN or Wi-Fi connection, all oven functions can be managed remotely. In addition, this option includes the installation of an automatic valve to exhaust the vapors produced during cooking.
Adjustable cooking air ventilation
If a lower air flow rate is required for cooking particular products, the oven can be equipped with a dual-speed fan motor or alternatively install an INVERTER on the fan motor.
Automatic vapor exhaust valve
Upon request, the opening of the vapor exhaust valve can be automated. Appropriately set, it will then be possible to open the vapor exhaust valve, a certain time before the end of firing.
CAUTION : Available only for kilns equipped with “electronic” panel
Single-phase power supply
In the standard version, the oven is arranged to be powered at a three-phase voltage of 230V or 400V (value to be specified when ordering).
However, upon request, it is possible to supply the oven with a SINGLE-PHASE voltage of 230V. The frequency of the supply voltage can be either 50 or 60 Hz.
Left door opening
The oven is normally supplied with the door hinges on the right.Upon request it is possible to make the oven with the door hinges on the left (the oven structure remains unchanged only the door opening is reversed)
Technical Sheets
