Minicombo E 40×60
ROTARY CONVECTION OVEN
- sized for 8 or 10 40×60 trays
- available in ELECTRIC version only
Oven complete with :
- Motorized extractor hood
- Stainless steel vapour suction housing
- Stainless steel base
- Double-glazed door
- Cooking chamber, façade and door made of stainless steel
- High-performance armored heating elements
- New humidifier; enhanced, easy to access and totally removable
- Manual valve for the discharge of excess steam
CONFIGURABLE
Under the oven it is possible to install according to your needs:
- Tray holder support
- Proofer
- Electric chamber with 2 trays and proofer
Minicombo E 40×60
| Minicombo E 40×60 8T | Minicombo E 40×60 10T | |
|---|---|---|
| electric power (kw) | 12 | 12 |
| baking surface (m²) | 1.9 | 2.4 |
| width (cm) | 92 | 92 |
| depth (cm) | 104 | 104 |
| height (H) | 109 | 126 |
| weight (kg) | 285 | 305 |
| number of trays | 8 | 10 |
| trays distance (cm) | 8.3 | 8.3 |
Possible combinations
With Proofer
| width (cm) | 92 |
|---|---|
| depth (cm) | 104 |
| electric power (kw) | 0.5 |
| weight (kg) | 65 |
| number of trays | 16 |
| trays distance (cm) | 9.3 |
With Support
| width (cm) | A | 92 |
|---|---|---|
| depth (cm) | B | 104 |
| weight (kg) | kg | 35 |
| number of trays | nr. | 12 |
| trays distance (cm) | cm | 8.2 |
With electric deck and proofer
Proofer
| width (cm) | 92 |
|---|---|
| depth (cm) | 104 |
| electric power (kw) | 0.5 |
| weight (kg) | 65 |
| number of trays | 16 |
| trays distance (cm) | 9.3 |
Electric deck
| H.18 | |
|---|---|
| electric power (kw) | 4.5 |
| height (H) | 32 |
| working height (H) | 18 |
| weight (kg) | 125 |
| trays number | 2 |
Accessories
Finishes
Optionals
LCD Control Panel
The electronic “LCD” panel allows management of various functions such as: delayed ignition, program storage, and programming of a multi-temperature firing cycle. It also has a manual operation section in case of emergency. In addition, this option includes the installation of an automatic valve to exhaust the vapors produced during cooking.
TOUCH Screen Control Panel
The electronic “TFT” panel with TOUCH SCREEN allows management of various functions such as, delayed ignition, program storage and programming of a multi-temperature firing cycle. By connecting it to the Internet via a LAN or Wi-Fi connection, all oven functions can be managed remotely. In addition, this option includes the installation of an automatic valve to exhaust the vapors produced during cooking.
Adjustable cooking air ventilation
If a lower air flow rate is required for cooking particular products, the oven can be equipped with a dual-speed fan motor or alternatively install an INVERTER on the fan motor.
Automatic vapor exhaust valve
Upon request, the opening of the vapor exhaust valve can be automated. Appropriately set, it will then be possible to open the vapor exhaust valve, a certain time before the end of firing.
CAUTION : Available only for kilns equipped with “electronic” panel
Single-phase power supply
In the standard version, the oven is arranged to be powered at a three-phase voltage of 230V or 400V (value to be specified when ordering).
However, upon request, it is possible to supply the oven with a SINGLE-PHASE voltage of 230V. The frequency of the supply voltage can be either 50 or 60 Hz.
Left door opening
The oven is normally supplied with the door hinges on the right.Upon request it is possible to make the oven with the door hinges on the left (the oven structure remains unchanged only the door opening is reversed)
Technical Sheets
